Shuttle SilentX PC60 Power Supply with 80PLUS logo (PC60)

The PC60 provides the additional power needed to satisfy the demands of high power graphics cards and large capacity storage devices. The 80PLUS logo identifies PC60 as a modern product with at least 80% energy-efficiency whereas other power supplies range from 65-75% efficiency. It is the optimal solution for power users wanting to upgrade without compromising the efficiency, stability, low-noise, and portability of the XPC.

- Input
      Input Voltage: 100~240V AC
      Input Current: 6A / 3A (100/240V AC)
      Frequency: 60~50 Hz
      Active PFC (Power Factor Correction)

- Output
      Total combined output (3.3V / 5V / 12V): 300W
      Total combined output (3.3V / 5V): 90W
      Max. Current: 3.3V: 14.5A / 5V: 15A / 12V: 2x 14A / -12V: 0.3A / 5VSB: 2A
      Hold up time: >17ms (full load, 115V AC)
      +12V Rise time: <20ms (full load, nominal line)
      Short circuit protection (SCP): latch off
      Other protection: OTP, OPP, UVP, OCP
      Power good signal: TTL compatible
      +5V Standby at 2.0A
      +3.3V Remote sensing

- Energy-efficiency
      80 PLUS logo: at least 80% efficient at 20%, 50%, and 100% loads
      aligns to the power supply requirements
      in the EPA's Energy Star 4.0 standard for computers

- Connectors
      Mainboard ATX 4 pin (12V) + 20 pin
      1x FDD, 3x S-ATA, 2x Molex
      Cable length designed for the XPC

- Environmental
      Operating Temperature: 10~50°C
      Storage Temperature: -40~70°C
      MTBF: >100.000 hours (75% load, 25°C)

- RFI/ EMI/ Safety
      FCC class B, CE, BSMI, CCC

- Acoustic
      <30dB at 50cm for 200W LoadGeneral

- Other
      Dimension: 190 x 82 x 43 mm (l x w x h)
      Weight: 0.9kg net, 1.0kg gross

- XPC compatibility
      Compatible with XPC chassis G, G2, G5, G6 and the models ST61G4, D10, K45, K48,
      but it is NOT compatible with SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5.